Friday, 6 February 2015
The first thing to do is remove the old zip slider off the jacket. You can gently widen the zip with a flat head screw driver to let it slide off the metal end, shown here, or take off the metal end itself. Be careful not to damage the teeth and keep the metal end.
Once you have your zip head, slide the zip over the end of the zip where you removed the metal end, or slightly widen the new zip slider with a flat head screw driver to get it over the metal end.
Either way, make sure to put the zip faces the right way and with the wider end of the slider to the top of the jacket. Look at another zip if you are not sure.
If the zip slides off, add another clip, use pliers to make the metal end fatter or even add stiches of a matching colour so the zip can't fall off.
If you ever have a zip slider that keeps sliding off, you can see its easy to fix.
By the way, if a zip slider won't close the teeth together you can try using pliers to close the slider gap slightly, as it might not be pressing the teeth together enough.
There you go- all fixed!